All the keys and combinations of the program, by page. The keys you assign yourself in Mappings and the keys of the SHOW buttons are added to these. A key assigned in Mappings takes priority over the program shortcut that uses the same key.
| Key |
What it does |
| F1 |
Live |
| F2 |
Show |
| F3 |
Program |
| F4 |
Scenes |
| F5 |
Patch |
| F6 |
Fixtures |
| F7 |
Outputs |
| F8 |
Mappings |
| F9 |
Options |
| F10 |
Playbacks |
| F11 |
Full screen (and back to the window) |
| F12 |
Opens this manual on the page you are on (also the “?” button in the top bar) |
| Ctrl+N |
New show |
| Ctrl+O |
Open a show |
| Ctrl+S |
Save the show (the first time, it asks for a name) |
| Ctrl+Shift+S |
Save the show with another name (“Save as…”) |
| Ctrl+B |
Blackout (on and off) |
| Esc |
Stop all. In Learn mode, cancels the pending control or leaves the mode; with “Record” armed in Playbacks, disarms it |
| Ctrl+→ |
Next scene in each playing group |
| Ctrl+← |
Previous scene in each playing group |
| G |
BeatGO (except on the Show page) |
If a page is locked, its key asks for the password (if there is one) and unlocks it. With the SHOW locked (kiosk mode) the page keys do not work, and with Setup locked neither do Ctrl+N, Ctrl+O and Ctrl+Shift+S.
T, G and the keys you assign in Mappings do not act while you are typing in a text field, such as the command line of Program.
| Key |
What it does |
| Space |
GO of the selected playback (one GO per press) |
| Shift+Space |
Back on the selected playback |
| PgUp |
Previous playback page |
| PgDn |
Next playback page |
| Esc |
Disarms “Record” |
They work on the Playbacks page as long as you are not typing in a text field.
| Key |
What it does |
| Typing |
What you type on the page goes to the command line |
| Enter |
Runs the command |
| ↑ / ↓ |
The last commands |
| Esc |
Clears the command line (with the line empty, Stop all) |
See the command line.
| Key |
What it does |
| The key of a button |
Presses that button (while you hold it, if it is a flash button) |
| Del / Backspace |
In edit mode, removes the control in the selected cell |
| Esc |
In edit mode, clears the selection |
| Key or gesture |
What it does |
| Space |
Play or stop from the cursor |
| Del |
Deletes the selected block |
| Ctrl+wheel |
Zoom on the timeline |
| Shift+wheel |
Move through time |
| Double click on the ruler |
Play from there |
After you click a fader or a slider:
| Key or gesture |
What it does |
| ↑ / → |
Up one step |
| ↓ / ← |
Down one step |
| PgUp / PgDn |
Up or down ten steps |
| Double click |
Returns it to its rest value (usually zero) |
| Key or gesture |
What it does |
| Ctrl+click / Shift+click |
Selects several cues or steps to change their times at once |
| Double click on a cue or a step |
Loads it into the programmer |
| Double click on the number of a cue |
Changes its number |
| Wheel over a clicked time |
±0.1 s (with Shift, ±1 s) |
| Esc in a field |
Leaves the value as it was |
| Gesture |
Where |
What it does |
| Alt+click |
Almost any control |
Takes it to the open SHOW page |
| Shift+click |
Learn mode |
Uses the control instead of mapping it |
| Ctrl+click |
Flash buttons of the mixer |
Keeps the flash on until the next click |
| Ctrl+click / Shift+click |
Fixtures, groups and 2D plan (Program and Patch), scene list |
Adds to the selection or removes from it |
| Wheel |
2D plan |
Zoom |
| Drag with the right or middle button |
2D plan |
Moves the view (double click: centres it) |
| Right click |
15° button of the 2D plan |
Rotates the other way |
| Hold down “Unlock” |
Locked Show |
Unlocks |
